Home / Service areas / Riverview and Apollo Beach
Deck builder in Riverview and Apollo Beach, FL
Composite and PVC decks in Riverview, Apollo Beach and Gibsonton.
We build decks in Riverview, Apollo Beach and Gibsonton in southern Hillsborough County, from canal-front homes on the bay to newer subdivisions east of I-75.
Building a deck in Riverview and Apollo Beach
- County permits: Riverview, Apollo Beach and Gibsonton are unincorporated, so permits come from Hillsborough County through HillsGovHub. We handle it. See deck permits.
- Canal-front homes: Apollo Beach homes on saltwater canals get spray and humidity. We use stainless hardware and PVC or capped composite boards.
- Flood zones: Waterfront Apollo Beach and Gibsonton sit in FEMA flood zones, which affects deck height and footing design.
- HOAs: Most newer Riverview communities need architectural approval. We supply the drawings and samples.
Deck services in Riverview
- New composite decks: Trex, TimberTech, Fiberon, Deckorators and MoistureShield, on concrete footings with framing at 12 inches on center.
- Deck replacement: Tear-out of old pine decks, new footings and framing, and new boards. Common on newer two-story subdivision homes.
- Deck repair: Soft boards, rotted posts, loose ledgers and wobbly railings when the rest of the deck is sound.
- Railings and stairs: Aluminum, cable and composite railings, plus stairs wrapped to match.
- Pergolas and covers: Shade over all or part of the deck.
Choosing boards for a Riverview deck
Near Apollo Beach canal homes and Gibsonton, salt air is the main enemy. We recommend PVC boards such as TimberTech AZEK, or a premium capped composite, with stainless fasteners and connectors. Aluminum or stainless cable railing holds up far better than steel or wood. Inland streets can use standard capped composite with coated hardware.
| Spot | Boards | Hardware | Railing |
|---|---|---|---|
| Waterfront or within a few blocks of salt water | PVC or premium capped composite | Stainless | Aluminum or stainless cable |
| Inland Riverview | Capped composite (Trex, TimberTech, Fiberon) | Coated, rated for treated lumber | Aluminum, composite or cable |
| Budget or rental | Pressure-treated pine | Coated | Wood or aluminum |
What a deck costs in Riverview
Our recent ground-level composite quotes have run about $41 to $48 per square foot installed, including footings, framing, boards, fascia and hidden fasteners:
| Deck | Size | Installed price |
|---|---|---|
| Ground-level Trex deck | 16 × 12 (192 sq ft) | $7,889 |
| Ground-level Trex deck | 20 × 12 (240 sq ft) | $11,410 |
| Add: two runs of Trex-wrapped steps | — | $2,849 |
| Add: low-voltage deck lighting | — | $1,200 |
Coastal hardware, PVC boards, raised decks and flood-zone design add to these numbers. The deck cost guide explains each line.
Permits and approvals in Riverview
Deck permits here come from Hillsborough County Development Services through the HillsGovHub portal. Nearly every newer Riverview community needs HOA approval. Here's how we handle it:
- We measure and draw a site plan and construction details.
- If you have an HOA or association, we send them the drawings and material samples first.
- We submit the permit and answer any review comments.
- The inspector checks the footings, the framing and the finished deck. We're there for each visit.
More detail is in our deck permit guide.
How long a deck takes
Permit review usually takes two to four weeks, sometimes longer for flood-zone review. Once the permit is issued, most decks take one to two weeks on site. Bigger, raised or multi-level decks take longer.
Neighborhoods we serve around Riverview
Riverview, Apollo Beach, Gibsonton, Ruskin and Sun City Center.
Common questions
Can you build a deck on a canal-front home in Apollo Beach?
Yes. We use PVC or capped composite boards with stainless hardware, and design for flood zone rules where they apply.
How much does a composite deck cost in Riverview?
Our recent ground-level composite decks have run about $41 to $48 per square foot installed. A 16×12 Trex deck was $7,889 and a 20×12 was $11,410. Raised decks, railings and stairs cost more.
How long does it take to build a deck in Riverview?
Usually two to four weeks for the permit, then one to two weeks of work on site for most decks.
What's the best decking material for Riverview?
PVC or premium capped composite with stainless hardware near the water, and standard capped composite inland.